No-load commissioning of cement pipe making machine

1, after starting the motor, the motor should be operated in a clockwise direction from the moving door frame.

2, with the governor to adjust the speed to 1000r/min or so, at this time the suspension roll machine operation should be smooth, no abnormal sound.

3, and then adjust the speed to the highest speed, the operation should be smooth, the suspension roller shaft radial pulsation is not more than 1mm.

(four) heavy load test run

In accordance with the "suspension roller tube operation technology," procedures for testing. In the course of the test, if found abnormal situation, should immediately stop the inspection, troubleshooting, and then test again, until normal.